50FPZ-20 Oil Pump

Product Name

50FPZ-20 Oil Pump / FPZ Corrosion-Resistant Self-Priming Centrifugal Pump

Model Number

50FPZ-20

Brand

FPZ Series
Brand/manufacturer should be confirmed according to the required supply source.

Product Details

The 50FPZ-20 is an FPZ-series horizontal self-priming centrifugal pump designed for liquid transfer applications. Available technical references identify the model as a corrosion-resistant polypropylene centrifugal pump suitable for transferring compatible chemical and industrial liquids.

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD supplies the 50FPZ-20 Oil Pump for industrial pumping and liquid-transfer applications in Malaysia and worldwide.

Description

The 50FPZ-20 FPZ Pump features a corrosion-resistant construction and self-priming centrifugal pump design. The FPZ series is commonly used for handling compatible acids, alkalis, salts, process liquids and other corrosive fluids.

The model designation 50FPZ-20 is associated with a 50 mm inlet size and a nominal 20 m head in published FPZ-series references. One published specification lists a 50 × 40 mm inlet/outlet arrangement, approximately 13 m³/h flow and 2.2 kW motor power for this model.

Important: Although this product is listed by ASIA-MECH as an ''Oil Pump,'' available references identify 50FPZ-20 primarily as an FPZ self-priming centrifugal pump. Application suitability for a specific oil or other fluid must be confirmed based on viscosity, temperature, chemical compatibility, flow and head requirements.

Features

• FPZ-series self-priming centrifugal pump

• Horizontal pump configuration

• Corrosion-resistant polypropylene construction available in FPZ designs

• Self-priming capability

• Suitable for compatible industrial liquid-transfer applications

• Mechanical seal design

• Suitable for chemical and process-fluid applications

• Available in direct-coupled and coupled configurations depending on supplier/manufacturer

• Designed for industrial pumping applications

Applications

The 50FPZ-20 may be considered for:

• Chemical liquid transfer

• Industrial process systems

• Acid and alkali handling

• Water and wastewater applications

• Chemical processing equipment

• Manufacturing plants

• Surface-treatment systems

• Industrial liquid circulation

• Compatible oil or process-fluid transfer, subject to viscosity and material compatibility verification

Specifications

Parameter	50FPZ-20
Model	50FPZ-20
Pump Type	Self-priming centrifugal pump
Series	FPZ
Inlet / Outlet	50 / 40 mm
Published Flow Rate	Approximately 13 m³/h
Published Head	Approximately 20 m
Published Motor Power	Approximately 2.2 kW
Published Speed	Approximately 2,840–2,900 rpm
Construction	Reinforced polypropylene in published FPZ references
Configuration	Horizontal
Seal	Mechanical seal
Application	Industrial liquid transfer

Published specifications vary between FPZ manufacturers and configurations. The values above should therefore be verified against the actual manufacturer's datasheet before ordering, especially motor voltage, frequency, material grade, seal material, flow/head curve and fluid compatibility.

FAQ

What is the 50FPZ-20 pump?

The 50FPZ-20 is an FPZ-series self-priming centrifugal pump used for industrial liquid transfer.

Is 50FPZ-20 a hydraulic gear pump?

No. Available references identify the 50FPZ-20 as a centrifugal/self-priming pump rather than a hydraulic gear pump.

What is the flow rate of 50FPZ-20?

Published FPZ references list approximately 13 m³/h for the 50FPZ-20 configuration. Actual performance depends on the pump configuration and operating conditions.

What is the head of the 50FPZ-20?

Published specifications list approximately 20 m head for the 50FPZ-20. Always verify the manufacturer's pump curve for the required duty point.

Can 50FPZ-20 pump oil?

It depends on the type and viscosity of the oil. The FPZ series is primarily documented for compatible chemical and industrial liquids. Oil compatibility, viscosity, temperature, mechanical seal and motor requirements should be checked before selection.

Where can I buy 50FPZ-20 in Malaysia?

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD supplies the 50FPZ-20 Oil Pump and can assist with model verification and sourcing.

Related FPZ Models

Other FPZ models found in published references include:

• 25FPZ-10

• 32FPZ-11

• 40FPZ-18

• 40FPZ-25

• 50FPZ-20

• 50FPZ-22

• 50FPZ-28

• 65FPZ-25

• 65FPZ-28

• 65FPZ-32

• 80FPZ-28

• 80FPZ-30

• 80FPZ-32

• 100FPZ-40

Model availability and exact specifications vary by manufacturer.

Alternative Models

Depending on the required application, alternatives may include other FPZ-series centrifugal pumps or other chemical/process pumps. The correct alternative should be selected based on:

• Required flow rate

• Pump head

• Fluid type

• Fluid viscosity

• Operating temperature

• Chemical compatibility

• Inlet/outlet size

• Motor power

• Seal material

Why Buy From ASIA-MECH?

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD provides hydraulic, pneumatic and industrial pumping solutions in Malaysia. We offer genuine and aftermarket brands, sourcing support, technical assistance and door-to-door delivery.

Our service coverage includes Perak, Penang, Kedah, Perlis, Pahang, Kuala Lumpur, Selangor, Johor, Melaka, Kelantan, Sabah and Sarawak, with international delivery options.

For the 50FPZ-20, please provide the pump nameplate, existing pump photo or required flow/head so the correct specification can be verified before quotation.

Meta Title

50FPZ-20 Oil Pump | FPZ Self-Priming Pump Malaysia

Meta Description

Buy 50FPZ-20 Oil Pump / FPZ self-priming centrifugal pump from ASIA-MECH Malaysia. Industrial liquid transfer pump with sourcing and delivery support.

SEO Keywords

50FPZ-20 Oil Pump, 50FPZ-20 pump, 50FPZ pump Malaysia, FPZ self priming pump, FPZ centrifugal pump, 50FPZ-20 centrifugal pump, industrial oil pump Malaysia, chemical pump Malaysia, self priming pump Malaysia, centrifugal pump supplier Malaysia, industrial pump supplier Malaysia, FPZ pump supplier Malaysia, 50FPZ-20 supplier, corrosion resistant pump Malaysia

Contact ASIA-MECH

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD
Tel: 05-2821518
Mobile / WhatsApp: +60 16-550 2288
Email: asiamech88@gmail.com

Malaysia & Worldwide Supply | Genuine & Aftermarket Options | Door-to-Door Delivery

SUPPLY BY ASIA-MECH MALAYSIA PHILIPINES THAILAND INDONESIA

FPZ Type Oil Pump

Model	Inlet x outlet	Flow Q	H	Speed n	吸入高度	电机功率P
	(mm)	(m3/h)	(m)	(r/min)	(m)	(kw)
25FPZ-10(D)	25×20	2.5	10	2840	5	0.55
32FPZ-11(D)	32×25	3.4	11	2840	5	0.75
40FPZ-18	40×32	11	18	2840	5	1.5
50FPZ-20	50×40	13	20	2840	5	2.2
65FPZ-25	65×50	26	25	2840	5	4
80FPZ-32	80×65	50	32	2840	5	7.5
100FPZ-40	100×80	100	20	2840	5	11